Sản phẩm, dịch vụ máy soi >> Thiết bị đo phóng xạ, đo tia X, gamma, neutron, beta, alpha >> Máy đo liều phóng xạ cầm tay Tracerco Norm monitor IS GM-ATEX
Máy đo liều phóng xạ cầm tay Tracerco Norm monitor IS GM-ATEX
Nhóm dịch vụ đã thực hiện: [::]
Tag: ,Liên hệ: 0976.275.983 hoặc 0941.88.99.83 hoặc email: midtechvn@gmail.com - Mr. Hoàng Anh Quý!
Máy đo liều phóng xạ cầm tay Tracerco Norm monitor IS GM-ATEX
An toàn nội tại (ATEX/IECEx) Giám sát nhiễm bẩn phóng xạ
(thay thế cho model Tracerco T201). Bao gồm thiết bị cầm tay, đầu dò GM
thông minh và ống trượt.
Cung cấp trọn bộ với chứng chỉ hiệu chuẩn và chứng nhận Kiểm tra khu vực
nguy hiểm tham khảo
Benefits
An toàn nội tại (ATEX/IECEx) Giám sát nhiễm bẩn phóng xạ
(thay thế cho model Tracerco T201). Bao gồm thiết bị cầm tay, đầu dò GM
thông minh và ống trượt.
Cung cấp trọn bộ với chứng chỉ hiệu chuẩn và chứng nhận Kiểm tra khu vực
nguy hiểm tham khảo
Benefits
• Intrinsically safe - no need for a hot work permit
• ATEX or CSA approved
• Easy to clean and decontaminate
• Digital display and live background subtraction
• Multiple measurement modes
• Bq/cm2
output for NORM Isotopes
• Adjustable and audible alarm thresholds for
improved safety
• Two detachable probes (GM and Scint) with in built
calibration data
Markets
• Oil and Gas
• First responders
• Military
• Life sciences
Accessories
• Robust, weatherproof transit case and holster
• Extension pole kit
• Check source
Performance
Radiation detected Scint: Gamma, high energy beta
GM: Alpha, beta, gamma
Automatic direct translation
to Bq/cm2
for Pb-210 (wet or dry),
Ra-226 (wet or dry), Sr-90,
Am-241, C-14, Cl-36
Over-range response Scint: Bar graph display will
read full scale. Digital numeric display
will read “0UEr”
GM: Bar graphic display will
read full scale. Digital numeric display
will show 0UEr (over) above 4000 CPS
Scintillator detector NaI crystal in metal/polymer
enclosure
Integrate period Auto = 60 seconds or 1000 counts
User defined = 5 - 600 seconds
GM Detector Single halogen thin window
Geiger Muller Tube
Measurement modes Scint: CPS, μSv/h
GM: CPS, bq/cm2
All modes have a background subtraction options CPM and μR/h available
Count range Scint: 0 - 200,000 cps
(1.2 million cpm)
GM: Bar graph display
(0-1000 CPS). Digital numeric
display in CPS or Bq/cm2
Dose rate range
(Scint only)
0.000 to 50µSv/h (Cs137 only)
(0.0 - 5000 µR/h). Dose rate function
only to be used in accordance with
North American guidance for NORM
monitoring - not recommended for
general dose rate measurement
Electrical characteristics
Battery Varta Energy 6LP3146 Low battery indication On 10 hours battery life remaining
Battery life Scint: Scintillator: 55 hours
typically with background
radiation
GM: 190 hours typically with
background radiation
Variation with
battery voltage
Scint: +/-2%
GM: < 2%
Mechanical characteristics
Case material Static dissipative nylon body
with ABS window
Weight Scint: Handset: 500g
Scintillator probe: 700g
GM: Handset: 500g
GM probe: 500g (approx.)
Environmental
Variation with temperature <10% Humidity range 0 - 95%
Ingress protection rating Scint: Handset: IP65,
Scintillator probe: IP67
GM: Handset: IP65,
GM probe: IP34
Hazardous area certification code
ATEX: Certification No. Baseefa12ATEX0209X
Marking - II 1G Ex ia IIC T4 Ga (-20°C ≤ Ta ≤ +50°C)
IECEx: Certification No. IECEx BAS 12.0114X
Marking - Ex ia IIC T4 Ga (-20°C ≤ Ta ≤ +50°C)
CSAC : Marking - Class I, Div 1, Gps A,B,C, D T4 (-20°C ≤ Ta ≤ +50°C)
Marking - Ex ia, IIC T4 (-20°C ≤ Ta ≤ +50°C)
CSAUS : Marking - Class I, Div 1, Gps A,B,C, D T4 (-20°C ≤ Ta ≤ +50°C)
Marking - Class I, Zone 0, AEx ia, IIC T4 (-20°C ≤ Ta ≤ +50°C)
Hazardous area classification code
ATEX & IECEx: Zone 0, 1, 2 gas group IIA, IIB, IIC
CSAC&US : Division 1 & 2, Groups A, B, C and D
Zone 0, 1, 2 gas group IIA, IIB, IIC
Standard compliance
BSEN 61526, EN55011, IEC60079-0, IEC60079-11, IEC61010-1,
UL 913, UL 60079-0, UL 60079-11, CSA C22.2 No 0-10, CSA C22.2
No 157-92, CSA 60079-0:07, CSA 60079-11:02
